Planar PL2210MW User Manual

9 FULL Selects wide format for display. Expansion Mode ASPECT Selects 4:3 format for display. Auto Adjustment Auto adjusts the H/V Position, Pha

10 Information Shows the resolution, H/V frequency and input port of current input timing. Icon Function Description 9300 CIE coordinated Color

11Technical Information Specifications LCD Panel Size 22W" Display Type Active matrix color TFT LCD Resolution 1680 x 1050 Display Dot 1

12Power Management Mode Power Consumption* AC Input LED Color DPM On 52 W maximum 240 VAC Green DPM Off 2 W maximum 240 VAC Yellow DC switc

13Standard Timing Table If the selected timing is NOT included in table below, this LCD monitor will use the most suitable available timing. SYNCWID

14 SYNCWIDTHFRONTPORCHBACK PORCH TIMING NAME FH (KHz) FV (Hz) SYNC POLARITYTOTAL/ ACTIVE (DOT / LINE) (DOT / LINE) PIXEL FOREQ.(MHz) 1024x768 60.023

15Troubleshooting This LCD Monitor has pre-adjusted using factory standard VGA timings. Due to the output timing differences among various VGA card

16Product Registration and Technical Support Register Your Planar Products Today Thank you choosing Planar. To assure you receive all the benefits

1Contents Contents...1 Preface ...

2Preface This manual is designed to assist users in setting up and using the LCD Monitor. Information in this document has been carefully checked f

3Important Safety Instructions Please read the following instructions carefully. This manual should be retained for future use. 1. To clean LCD

4Installation Unpacking Before unpacking the LCD Monitor, prepare a suitable workspace for your Monitor and computer. You need a stable and clean

5 Connecting the LCD Monitor and Base When you open the box, place the base and put on the desk first. Then connect the LCD monitor and base. (See

6 Connecting the AC Power 1. Connect the power cord to the LCD Monitor.(See Fig. 1-6) 2. Connect the power cord to an AC power source.

7Display Controls User Controls A brief description and the location of all LCD Monitor functions controls and indicators: Figure 2-1 1 Power LE

8Adjusting the Monitor's Display Main OSD Main Menu iconSub Menu item Sub Menu item Description STANDARD Default Setting. Reflects native