Planar PE170 User Manual download pdf (Page 5)

Connecting the Display

1. Power off your computer.

2. Connect one end of the signal cable to the LCD

Monitor’s VGA port.(See Fig 1-5)

3. Connect the other end of the signal cable to the

VGA port on your PC.

4. Make sure connection are secure.

Figure 1-5

+-Attention

This device must be connected to an off-the-shelf video cable in order to comply with FCC regulations. A ferrite-core

interface cable is included in the LCD Monitor package.

This device will not be in compliance with FCC regulations when a non-ferrite-core video cable is used.

Connecting the AC Power

1. Connect the power cord to the LCD Monitor.(See

Fig. 1-6)

2. Connect the power cord to an AC power source.

Figure 1-6

Setting Up the LCD Monitor

1. Turn on the LCD monitor’s hard power switch,

located on the back of the monitor

2. Turn on the LCD Monitor's soft power switch,

located on the bezel of the monitor.

Figure 1-7

Power Management System

This LCD Monitor complies with the VESA DPMS (version 1.0) Power Management guidelines. The VESA DPMS

provides four power saving modes through detecting a horizontal or vertical sync. signal.

When the LCD Monitor is in power saving mode, the monitor screen will be blank and the power LED indicator will

light yellow.

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Planar PE170 User Manual Page 5